Acnodes FPC 5121 Manual de usuario

FPC 5121 Industrial Fanless Panel PC User Manual FPC5121: 12.1” Industrial Fanless Touch Panel PC with Atom N2600 1

1.4 I/O Outlets Please refer to the following illustration for I/O locations of the FPC5121.

1.5 Packing List When you receive the FPC5121, the bundled package should contain the following items:  FPC5121 x 1  Panel Mount Kit x

CHAPTER 2 HARDWARE INSTALLATION The FPC5121 provides rich I/O ports and flexible expansions for you to m eet different demand, for ex

sh Step 2 Find out the cover on the side of the system . Step 3 Locate the CompactFla TM socket, and insert the c

2.2 Serial Ports Interface The FPC5121 has two onboard serial ports, COM1 (RS-232/ 422/ 485) and COM2 (RS- 232). The following table sh

When COM1 is set to RS-422 or RS-485, the pin assignm ents are listed below: Pin # Signal Name RS-422 RS-485 1 T

2.3 Ethernet The FPC5121 is equipped with two high performance Plug and Play Ethernet interfaces, full compliant with IEEE 802.3 standard, and

2.4 Mountings – Panel/Wall/Desktop/VESA There are several m ounting ways for the FPC5121, Panel, W all, Desktop and VESA mountings.

2.4.2 Wall-Mounting The FPC5121 is designed for Wall m ounting application. Please refer to the following steps: Find out the screws as marked

2.4.3 Desktop-Mounting The FPC5121 is designed for desktop mounting application. Please refer to the following steps: Step 1 Find out th

FPC 5121 Industrial Fanless Panel PC Disclaimers This manual has been carefully checked and believed to contain accurate infor

2.4.4 VESA- ARM Mounting Step 1 Find out the screws as m arked on the back side of chassis. Step 2 Assem ble the V

Step 3 VESA mounting Installation completed. Caution Use r ecommended/suitable mounting apparatus to avoid risk of injury.

2.5 H DD Installation The FPC5121 provides a convenient Hard Disk Drive (HDD) brack et for users to install 2.5” SATA HDD. Please follow the st

3. Screw the 2.5e HDD, together with the HDD M ylar, to the HDD bracket. 4. Fix the HDD bracket into the system, and plug the data and pow

2.6 DRAM Installation The FPC5121 provides one 204-pin DDR3 800MHz SO-DIMM socket that support system memory up to 2GB. Please follow steps bel

3. Install the m emory module into the socket and push it firm ly down until it is fully seated. The socket latches are levered upwards and c lip

2.7 Wireless LAN Card Installation The FPC5121 provides one Mini card slot for user to install one wireless LAN card. When installing the wireless

CHAPTER 3 AMI BIOS SETUP UTILITY This chapter provides user s with detailed description how to set up basic s ystem configuration through the A

 Left/Right The Left and Right <Arrow> keys allow you to select a setup screen.  Up/Down The Up and Down <Arrow> keys allow you

FPC 5121 Industrial Fanless Panel PC Safety Precautions Before getting started, please read the following im portant safety precaut

Main Menu When you first enter the Setup Utility, you will enter the Main setup screen. You can alwa ys return to the Main s etup screen by selec

Advanced Menu  Launch PXE OpROM Use this item to enable or disable the boot ROM function of the onboard LAN chip when the system boots up

ACPI Settings You can use this screen to select options for the ACPI Settings, and change the value of the selected option. A description

CPU Configuration This screen shows the CPU Configuration, and you can change the value of the selected option.  Hyper Threading Technology

IDE Configuration  S ATA Controller(s) The optional settings are: [Disabled]; [Enabled].  Configure SATA as The optional settings are: [

USB Configuration You can use this screen to select options for the USB Configuration, and change the value of the selected option. A description

 NCT6627UD Super IO Configuration You can use this screen to select options for the Super IO Configuration, and change the value of the selected

PC Health Status This screen shows the Hardware Health Configuration, and a description of the selected item appears on the right side of th

Chipset Menu The Chipset menu allows users to change the advanced chipset settings. You can select any of the items in the left frame of the screen

 M emory Frequency and Timing This item is for m emor y frequency and timing settings. Press <Enter> to go to the sub menu.

Ta ble of Conte nts Disclaimers ...

 Intel IGD Configuration You can use this screen to select options for the Intel IGD Configuration, and change the value of the selected option.

Boot Menu The Boot m enu allows users to change boot options of the system .  Boot Settings Configuration  Setup Prompt Timeout Use this

 Option ROM Messages Set display mode for option ROM. Configuration options are Force BIOS and Keep Current.  Interrupt 19 Capture

 User Password This item indicates whether a user password has been set. If the password has been installed, Installed displays. If n

 Save Changes and Reset When you have com pleted the system configuration changes, select this option to leave Setup and reboot the computer

CHAPTER 4 DRIVERS INSTALLATION 4.1 System FPC5121 supports Windows7. To facilitate the installation of s ystem driver, please carefully read

4.2 Touch Screen The FPC5121 uses the 5-wire analog resistve. There are the specification and driver installation which are listed be

3. Click Start menu and select “PenMount Utilities”; and then, a “PenMount Control Panel” pops out. 4. Select the “Standard Calib

5. Calibration: To adjust the display with touch panel, click “Calibration” and follow the calibrate point to do calibration; there are five po

4.3 Embedded O.S. The FPC5121 provides the WES 7. The O.S. is suppor ted devices which are listed below. 4.3.1 WES 7 Here are supported

CHAPTER 1 INTRODUCTION This chapter contains general inform ation and detailed specifications of the FPC5121. Chapter 1 includes the fo

4.3.2 Windows CE.NET 6.0 Here are supported onboard devices:  Onboard Multi I/O  SATA HDD  USB  PS2 Keyboard and mouse  CRT/L

1.2 Specifications 1.2.1 Main CPU Board  CPU  AtomTM N2600 1.6GHz processor onboard  System Chipset  NM10 Express  BIO

 Power connector  FPC5121 : DC power 10~30VDC (phoenix type) 1.2.3 System Specification 12.1” TFT LCD  Heat Dispensing Design

1.3 Dimensions This diagram shows you dimensions and outlines of the FPC5121.